TECHART for the GT3 models
992 series
TECHART Carbon Fiber Package and TECHART Formula VII forged wheel.
For 911 GT3 and 911 GT3 with Touring Package.
Striking visible carbon fiber upgrades and wider body.
The eye-catching aerodynamic TECHART carbon parts highlight the racing DNA of the Porsche 911 GT3 and 911 GT3 with Touring Package, while retaining the aerodynamic concept of the sports car at the same time.
The 15 millimeter wider TECHART lightweight fenders with wheel arch louvers as well as the TECHART carbon aero front lid make an impressive appearance.
Large air intakes at the front, a prominent front spoiler lip and an air inlet panel in the front apron, sport side mirrors and side skirts as well as the lower part of the rear apron – all made of high-quality TECHART visible carbon – replace the standard components.
The TECHART upgraded 911 GT3 also features a rear wing made entirely of carbon fiber with powerfully shaped wing end plates and a carbon air intake on the trunk lid.
Typically Porsche 911 GT3 – plus added TECHART freedom of choice.
The TECHART carbon package for the 911 GT3 is freely configurable and enables the TECHART-typical tailor-made refinement of the vehicle, either in matt or high gloss visible carbon or the renowned TECHART forged design carbon. A large selection of TECHART carbon fiber parts are manufactured by hand in the in-house carbon production facility.
With the TECHART rear lettering made of three-dimensionally cast acrylic glass letters, GT3 owners underline the sporty character of their personalized vehicle and make it a true one-off.
In detail: the TECHART carbon fiber aerokit.
1 TECHART carbon front spoiler and spoiler trims
2 TECHART carbon front air intake panel
3 TECHART carbon aero front hood with integrated air outlet shaft
4 TECHART carbon lightweight aero front fenders - 15 mm wider than standard, with wheel arch louvers
5 TECHART carbon side skirts
additionally recommended:
(1) TECHART carbon sport mirrors
(2) TECHART Formula VII Race forged wheels
6 TECHART carbon rear spoiler profile with TECHART lettering and carbon wing end plates
7 TECHART carbon rear apron panel, lower part
additionally recommended:
(2) TECHART Formula VII Race GT3 wheels
(3) TECHART rear lettering
8 TECHART carbon rear air intake panel with service hatch
Aerodynamics and individuality. The TECHART carbon rear spoiler.
Artisan carbon inlay, aramid fiber inlay or spotless lacquering: set a statement of uniqueness.
Carbon rear wing profile and end plates. TECHART lettering painted in black.
After the TECHART lettering is lacquered, a multi-layer clear coating is applied by hand for a perfect surface finish - silky matt or high gloss.
Scope: rear spoiler profile and end plates.
The TECHART lettering is a piece of art: a seamless carbon fiber inlay also known as marquetry. Carbon rear wing profile and end plates.
Handcrafted inlay work adds dimensionality. Available in matt or high-gloss finish.
Scope: rear spoiler profile and end plates.
Rear wing and end plates in carbon with TECHART lettering inlay made of aramid hybrid fabric.
The special feature of this seamlessly inserted lettering lies in its unusual material: a hybrid fabric made of carbon and aramid fibers adds a technical touch and motorsport appeal.
Scope: rear spoiler profile and end plates.
For GT3 Touring: the TECHART Rear Spoiler III
The fixed TECHART Rear Spoiler III is available for all 911 Carrera Coupe models and the 911 GT3 Touring. It is made entirely of carbon fiber and complements the TECHART aerodynamics and styling options for the 992 series Porsche 911.
The TECHART Rear Spoiler III consists of a paintable carbon fiber base body and a carbon spoiler lip, which can be ordered paintable or in spotless matt or high-gloss visible carbon fiber with a painted TECHART lettering.
Typical for the TECHART Rear Spoiler III: timeless, racing-inspired styling, increased downforce in every driving mode and well-balanced aerodynamics in all speed ranges. Besides its fuss-free installation, the Rear Spoiler III stands out with sophisticated design, improving the supply of cooling air to the engine. For this purpose, integrated air ducts were constructed using flow simulations. And thanks to its lightweight construction, it is more than 30% lighter than the standard rear spoiler.
The TECHART Rear Spoiler III comes with a general operating license (Allgemeine Betriebserlaubnis, ABE) issued by the Federal Motor Transport Authority.
Handcrafted TECHART sports steering wheels and exclusive interior details.
With Alcantara®, leather and motorsport-inspired heritage fabrics as well as carbon trim parts, the TECHART manufactory offers you endless possibilities to give your Porsche 911 GT3 a personal touch in the interior.
Optional TECHART Clubsport upgrades: roll bar and FIA homologated 6-point racing harness.
The TECHART roll bar comes with a parts certificate and offers additional safety and an unmistakably sporty look. For the racetrack, FIA homologated TECHART 6-points racing harnesses are available in black, red, green or yellow.
Dynamic turbine look: the new TECHART Formula VII forged wheel with central locking.
A unique turbine styling combined with low weight and modern forging technology. The expressive TECHART Formula VII forged wheel meets all the requirements to become a future classic in the world of wheel designs. The spectacular lightweight wheel with central locking celebrates its premiere as part of the customization program for the 911 GT3 models. It will also be available for the Porsche 911 Carrera GTS.
The wheel dimensions for the Porsche 911 GT3 are 9.5 x 20 inches at the front and 12 x 21 inches at the rear. For the 911 Carrera GTS, the TECHART Formula VII wheel is available in the sizes 9 x 20 inches and 11.5 x 21 inches. The new wheel design enables further personalization options with numerous variants and sophisticated surface finishes - individually tailored to the vehicle.
